Sony DCR-TRV50 Operating Instructions (primary manual) - Page 200

Changing the default settings with the menu To make the menu display disappear Press MENU. Menu items are displayed as the following icons: MANUAL SET CAMERA SET VCR SET LCD/VF SET MEMORY SET PRINT SET CM SET TAPE SET SETUP MENU OTHERS Selecting the mode setting of each item z is the default setting. Menu items differ depending on the position of the POWER switch. The screen shows only the items you can operate at the moment. The POWER switch is the name of the switch on the DCR-TRV50. It is referred to as MEMORY on the DCR-TRV40. Icon/item MANUAL SET P EFFECT Mode -- FLASH LVL WHT BAL HIGH z NORMAL LOW -- N.S. LIGHT z ON OFF Meaning POWER switch To add special effects like those in films or on the TV to images (p. 60, 75) Makes the flash level higher than normal. Normal setting Makes the flash level lower than normal. To adjust the white balance (p. 54) To use the NightShot Light (p. 35) To cancel the NightShot Light VCR CAMERA CAMERA MEMORY/ NETWORK CAMERA MEMORY/ NETWORK CAMERA MEMORY/ NETWORK AUTO SHTR z ON OFF To automatically activate the electronic shutter when shooting in bright conditions To not automatically activate the electronic shutter even when shooting in bright conditions CAMERA Note on FLASH LVL You cannot adjust FLASH LVL if the external flash (optional) is not compatible with the flash level. 200