Sony DCR-TRV50 Operating Instructions (primary manual) - Page 216
Symptom, Cause and/or Corrective Actions
View all Sony DCR-TRV50 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 216 highlights
Types of trouble and how to correct trouble Symptom The melody or beep sounds for five seconds. You cannot charge the battery pack. While charging the battery pack, no indicator appears, the indicator flashes in the display window. No function works though the power is on. When you set the POWER switch to VCR or OFF (CHG), if you move your camcorder, you may hear a clattering sound from inside your camcorder. The buttons do not appear on the touch panel. The buttons on the LCD screen do not work. The indicators appear mirrorreversed in the viewfinder or on the TV screen. Image data cannot be transferred by the USB connection. The cassette cannot be removed even if the cassette lid is open. Cause and/or Corrective Actions • Moisture condensation has occurred. c Remove the cassette and leave your camcorder for at least one hour to acclimatize (p. 228). • Some troubles have occurred in your camcorder. c Remove the cassette and insert it again, then operate your camcorder. • The POWER switch is not set to OFF (CHG). c Set it to OFF (CHG) (p. 16). • The battery pack is not properly installed. c Install it properly (p. 15). • Something is wrong with the battery pack. c Please contact your Sony dealer or local authorized Sony service facility. • Disconnect the power cord of the AC power adaptor or remove the battery, then reconnect it in about one minute. Turn the power on. If the functions still do not work, press the RESET button using a sharp-pointed object (If you press the RESET button, all the settings including the date and time return to their defaults.) (p. 15, 19, 240). • This is because some functions use a linear mechanism. Your camcorder is not malfunctioning. • The DISPLAY/TOUCH PANEL button is pressed. c Press the LCD screen lightly. c Press the DISPLAY/TOUCH PANEL button on your camcorder or the DISPLAY button on the Remote Commander (p. 42). • Adjust the screen (CALIBRATION) (p. 230). • The mirror mode is activated. This is not a malfunction. • The USB cable was connected before installation of the USB driver was completed. c Uninstall the incorrect USB driver and re-install the USB driver (p. 179, 182). • USBCONNECT is set to PTP in the menu settings when the POWER switch is set to MEMORY/NETWORK (DCRTRV50 only). c Set it to NORMAL (p. 207). • Moisture has started to condense in your camcorder (p. 228). 216