Sony DCR-TRV50 Operating Instructions (primary manual) - Page 126

Recording still images on "Memory Stick"s - Memory Photo recording You can record still images on "Memory Stick"s. Before operation Insert a "Memory Stick" into your camcorder. (1) Set the POWER switch to MEMORY/NETWORK (DCR-TRV50 only). Make sure that the LOCK switch is set to the left (unlock) position. (2) Press PHOTO lightly. The green z mark stops flashing, then lights up. The brightness of the image and focus are adjusted, being targeted for the middle of the image and are fixed. Recording does not start yet. (3) Press PHOTO deeper. The still image will be displayed after the shutter sounds. Recording is complete when the bar scroll indicator disappears. The image when you pressed PHOTO deeper will be recorded on the "Memory Stick." 2 [a][b] 1360 SFN 1 / 12 1 LOCK PHOTO 3 PLAY INDEX FN 1360 SFN POWER VCR OFF(CHG) CAMERA MEMORY/ NETWORK PHOTO PLAY INDEX FN [a]: Number of recorded images [b]: Approximate number of images that can be recorded on the "Memory Stick" You can record still images on "Memory Stick"s in the tape recording or tape recording standby For the details, see page 47. 126