Sony DCR-TRV50 Operating Instructions (primary manual) - Page 124

Using a "Memory Stick" - Introduction Selecting the image size You can select either of two image sizes Still images: 1360 × 1020 or 640 × 480. (When the POWER switch is set to CAMERA or VCR, the image size is automatically set to 640 × 480.) The default setting is 1360 × 1020. Moving pictures: 320 × 240 or 160 × 112 The default setting is 320 × 240. (1) Set the POWER switch to MEMORY/NETWORK (DCR-TRV50 only). Make sure that the LOCK switch is set to the left (unlock) position. (2) Press MENU, then turn the SEL/PUSH EXEC dial to select STILL SET (still image) or MOVIE SET (moving picture) in , then press the dial (p. 203). (3) Turn the SEL/PUSH EXEC dial to select IMAGESIZE, then press the dial. (4) Turn the SEL/PUSH EXEC dial to select the desired image size, then press the dial. The indicator changes as follows: Still images: 1360 640 Moving pictures: 320 160 1 LOCK MENU POWER VCR OFF(CHG) CAMERA MEMORY/ NETWORK 3 STILL SET MEMORY SET STILL SET BURST QUALITY IMAGESIZE RETURN 1360 1360 × 1020 640 × 480 REMAIN 12 [MENU] : END 4 STILL SET MEMORY SET STILL SET BURST QUALITY IMAGESIZE 640 × 480 RETURN REMAIN 60 [MENU] : END MOVIE SET MEMORY SET MOVIE SET IMAGESIZE REMAIN RETURN 320 320 × 240 160 × 112 REMAIN 40sec [MENU] : END MOVIE SET MEMORY SET MOVIE SET IMAGESIZE REMAIN RETURN 160 × 112 REMAIN 2min [MENU] : END 124