Sony DCR-TRV50 Operating Instructions (primary manual) - Page 189

Viewing Images Using your Computer Viewing images recorded on a tape on your computer - For Windows users If image data cannot be transferred by the USB connection The USB driver has been registered incorrectly as your computer was connected to your camcorder before installation of the USB driver was completed. Reinstall the USB driver following the procedure on page 182. If any trouble occurs Close all running applications, then restart your computer. Carry out the following operations after quitting the application: - Disconnect the USB cable. - Change the POWER switch to the other position or set the POWER switch to OFF (CHG) on your camcorder. Seeing the on-line help (operating instructions) of "PIXELA ImageMixer Ver.1.0 for Sony" A "PIXELA ImageMixer Ver.1.0 for Sony" on-line help site is available where you can find the detailed operating method of "PIXELA ImageMixer Ver.1.0 for Sony". (1) Click located in the upper-right corner of the screen. The ImageMixer's Manual screen appears. (2) You can find the information you need from the list of contents. To close on-line help Click at the top right of the screen. If you have any questions about "PIXELA ImageMixer Ver.1.0 for Sony" "ImageMixer Ver.1.0 for Sony" is a trademark of PIXELA corporation. For more information, refer to the instruction manual of the CD-ROM supplied with your camcorder. Note on using your computer Communications with your computer Communications between your camcorder and your computer may not recover after recovering from Suspend, Resume, or Sleep. 189