Sony DSC-RX100M5 Help Guide Printable PDF - Page 64

and an image is recorded. If you select [Hand-held Twilight] or [Anti Motion Blur] with [RAW] or [RAW & JPEG], the image quality becomes [Fine] temporarily. Reducing blur is less effective even in [Hand-held Twilight] or [Anti Motion Blur] when shooting the following subjects: Subjects with erratic movement. Subjects that are too close to the product. Subjects with continuously similar patterns, such as the sky, a beach, or a lawn. Subjects with constant change such as waves or water falls. In the case of [Hand-held Twilight] or [Anti Motion Blur], block noise may occur when using a light source that flickers, such as fluorescent lighting. The minimum distance that you can come close to a subject does not change even if you select [Macro]. For the minimum in-focus range, refer to the minimum distance of the lens attached to the product. Hint To change the scene, rotate the control wheel on the shooting screen and select a new scene. [33] How to Use Shooting Selecting a shooting mode Shutter Priority You can express the movement of a moving subject in various ways by adjusting the shutter speed, for example, at the instant of the movement with high speed shutter, or as a trailing image with low speed shutter. The shutter speed can be changed while recording movies. 1. Set the mode dial to S (Shutter Priority). 2. Select the desired value by turning the control wheel. 3. Adjust the focus and shoot the subject. The aperture is automatically adjusted to obtain proper exposure. Note If proper exposure cannot be obtained after setup, the aperture value on the