Sony DSC-RX100M5 Help Guide Printable PDF - Page 67
You cannot select [Auto] under [ND Filter].
View all Sony DSC-RX100M5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
suitable for appropriate exposure, the ISO value indicator will blink. The Metered Manual indicator does not appear when [ISO] is set to [ISO AUTO]. When the amount of ambient light exceeds the metering range of the Metered Manual, the Metered Manual indicator flashes. The SteadyShot warning indicator does not appear in manual exposure mode. The brightness of the image on the monitor may differ from the actual image being shot. You cannot select [Auto] under [ND Filter]. Hint By assigning [AEL hold] or [AEL toggle] to a desired button and turning the control ring or the control wheel while pressing that button, you can change the shutter speed and aperture (F-value) combination without changing the set exposure value. (Manual shift) [36] How to Use BULB Shooting Selecting a shooting mode You can shoot a trailing image of the movement of a subject with long exposure. BULB is suitable for shooting trails of light, such as fireworks. 1. Set the mode dial to M (Manual Exposure). 2. Press the bottom side of the control wheel to select the shutter speed, then turn the control wheel counterclockwise until [BULB] is indicated. 3. Press the bottom side of the control wheel to select the aperture value (Fvalue), and turn the control wheel to set the value. 4. Press the shutter button halfway down to adjust the focus. 5. Press and hold the shutter button for the duration of the shooting. As long as the shutter button is pressed, the shutter remains open. Note Since the shutter speed becomes slow and the camera-shake tends to occur