Sony SRR4 Product Manual (SRMASTER: SRR4 Operation Manual) - Page 17

Connect F65, Remove the connector cap from the, CAMERA connector of the unit.

Get Sony SRR4 PDF manuals and user guides View all Sony SRR4 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 17 highlights

Chapter 2 Preparation Connect F65 1 Align the base of the unit with the base of the F65 as shown in the diagram. The unit mounts onto the rear of the F65. Tips • When mounting the unit, first mount the F65 on a tripod and secure it such that it does not move. For details of mounting on a tripod, refer to the Operation Manual for the F65. • When mounting the unit, do so in an environment relatively free from dust, etc. 1 Remove the connector cap from the CAMERA connector of the unit. Tip Store the connector cap in a safe location so that you do not lose it. 2 Align and connect the CAMERA connector of the unit with the F65 connector. Couple the unit in the orientation shown. 2 Align the CAMERA connector of the unit with the F65 dock connector, and push the unit down. First, join as shown. Connect F65 17

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
Connect F65
17
Chapter 2
Preparation
The unit mounts onto the rear of the F65.
Tips
•
When mounting the unit, first mount the F65 on
a tripod and secure it such that it does not move.
For details of mounting on a tripod, refer to the
Operation Manual for the F65.
•
When mounting the unit, do so in an
environment relatively free from dust, etc.
1
Remove the connector cap from the
CAMERA connector of the unit.
Tip
Store the connector cap in a safe location so that you
do not lose it.
2
Align and connect the CAMERA
connector of the unit with the F65
connector.
1
Align the base of the unit with the base
of the F65 as shown in the diagram.
2
Align the CAMERA connector of the
unit with the F65 dock connector, and
push the unit down.
Connect F65
First, join as shown.
Couple the unit in the orientation shown.