Sony SRR4 Product Manual (SRMASTER: SRR4 Operation Manual) - Page 41

Setting Item Settings RUN MODE Selects the run mode of the internal time code generator. F RUN [Free Run]: Advances the time code while the power is on. R RUN [Rec Run]: Advances the time code only during recording. TCG SET Time code generator settings related to the main time code DF/NDF Sets the frame count mode. (Valid only when the frame DF [Drop Frm]: Drop frame mode frequency of this system is NDF [Non Drop Frm]: Non-drop frame mode 29.97 Hz.) Note UBG SOURCE 12H/24H This settings is valid only when TCG MODE is set to "PRST." Selects the source time code of user bits. TCG [TCG Source]: Same source time code as that of the time code generator INT [Internal]: Time code generated by the time code generator. Arbitrary user bits can be set regardless of the setting of TCG (see page 34). Selects the TIMER display mode. 12H [+/-12H]: 12-hour display mode 24H [24H]: 24-hour display mode Note OTHERS TC OUT Other settings related to the main time code TC Delay When +/-12H display is selected, the tens digit of the hours value is dropped for values less than 10. Selects the time code to output from the TC OUT connector. AUTO [Auto]: During playback, the time code read by the internal time code reader. During recording or when in E-E mode, the time code generated by the time code generator. TCG [TCG]: The time code generated by the time code generator. THRU [Through]: Outputs the time code input to the TC IN connector as is. Sets the phase difference between the LTC input from the TC IN connector and the time code generator. 0 [NO Delay]: Same timing +1F [+1F Delay]: The generator is delayed by one frame. +2F [+2F Delay]: The generator is delayed by two frames. +3F [+3F Delay]: The generator is delayed by three frames. +4F [+4F Delay]: The generator is delayed by four frames. +5F [+5F Delay]: The generator is delayed by five frames. Chapter 5 Menu Details TC Setup Menu 41