Sony SRR4 Product Manual (SRMASTER: SRR4 Operation Manual) - Page 19

Mount Control Panel on the F65, Attach the CP Bracket to the outside

Get Sony SRR4 PDF manuals and user guides View all Sony SRR4 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 19 highlights

Chapter 2 Preparation Mount Control Panel on the F65 3 Slide the control panel into the CP bracket. Attach the Control Panel (SRK-CP1, Option) to the F65, and connect the unit and the control panel with the control panel cable. 1 Attach the outside bracket supplied with the control panel to the side of the F65, and fasten using the 4 supplied screws (M3 × 5). There are 2 types of outside bracket. Attach the larger outside bracket to an F65 with a mechanical shutter or the smaller outside bracket to an F65 without a mechanical shutter. 4 Use the supplied control panel cable to connect the unit and the control panel. Screws (M3 × 5) 2 Attach the CP Bracket to the outside bracket. 5 Use the cable clamp as shown to fix the cable. Note Always turn off the power supply for the unit before disconnecting the control panel cable and removing the control panel. Mount Control Panel on the F65 19

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
Mount Control Panel on the F65
19
Chapter 2
Preparation
Attach the Control Panel (SRK-CP1, Option) to
the F65, and connect the unit and the control
panel with the control panel cable.
1
Attach the outside bracket supplied
with the control panel to the side of the
F65, and fasten using the 4 supplied
screws (M3 × 5).
There are 2 types of outside bracket. Attach
the larger outside bracket to an F65 with a
mechanical shutter or the smaller outside
bracket to an F65 without a mechanical
shutter.
2
Attach the CP Bracket to the outside
bracket.
3
Slide the control panel into the CP
bracket.
4
Use the supplied control panel cable to
connect the unit and the control panel.
5
Use the cable clamp as shown to fix the
cable.
Note
Always turn off the power supply for the unit before
disconnecting the control panel cable and removing
the control panel.
Mount Control Panel on
the F65
Screws (M3 × 5)