TASCAM DA-6400 TELNET protocol specifications - Page 10

TASCAM DA-6400/DA-6400dp TELNET protocol specifications DIRECT TRACK SEARCH PRESET Specify a take number to search for it directly. After a direct search, the operation of the controlled device depends on the data format (length) of this command. When the Data length is 4-byte When this command is received when the unit is in stopped or playback mode, it will be put in playback mode after the direct search. In all other modes, the same mode will be retained after the direct search. When the Data length is 6-byte After the direct search, the unit will follow the command given in Data 5/6. Command 23 Machine ID 0 Data 4 bytes or 6 bytes Meaning Notes Data 1 Take number tens digit Data 2 Take number ones digit Take number Data 3 Take number thousands digit Example: "2301" is take 123 Data 4 Take number hundreds digit When the Data length is 6-byte, the following data is added as an operation specification Data 5 Data 6 Operation Notes 1 0 STOP Stop after searching completes 1 2 PLAY Start playback after searching completes 1 4 PAUSE Start playback standby after searching completes ・ If a number is specified for a take that does not exist, the unit will return ILLEGAL [F2]. ・ If a Data 5/6 operation specification code that is not in the table is specified, the unit will return ILLEGAL [F2]. Return none 10 TEAC Corporation