TASCAM DA-6400 TELNET protocol specifications - Page 34

TASCAM DA-6400/DA-6400dp TELNET protocol specifications TC GENERATOR MODE SELECT This sets the TC GENERATOR mode of the controlled device. A return command is only sent when Sense [FF] is specified. Command 7F Category Code 06 Sub Command 20 Machine ID 0 Parameter 2 bytes Data 5 Data 6 Meaning Notes 0 0 FREE RUN FREE RUN timecode generator mode 0 1 FREE ONCE FREE ONCE timecode generator mode 0 2 TIME OF DAY TIME OF DAY timecode generator mode 0 3 JAM SYNC JAM SYNC timecode generator mode 0 4 REGEN REGEN timecode generator mode 0 5 REC RUN REC RUN timecode generator mode 0 6 TC SYNC REC TC SYNC REC timecode generator mode F F Sense This requests that the preset contents be returned. ・ If the unit receives any Data other than the above, it will send ILLEGAL [F2]. Return TC GENERATOR MODE RETURN [FF06A0] TC FRAME TYPE SELECT This sets the TC FRAME TYPE of the controlled device. A return command is only sent when Sense [FF] is specified for Data 5 and Data 6. Command 7F Category Code 06 Sub Command 21 Machine ID 0 Parameter 2 or 4 bytes Data 5 Data 6 Data 7 Data 8 Meaning Notes 2 3 23.976F 23.976F timecode frame type 2 4 24F 24F timecode frame type 2 5 25F 25F timecode frame type 2 9 D F 29.97DF 29.97DF timecode frame type 2 9 29.97NDF 29.97NDF timecode frame type 3 0 D F 30DF 30DF timecode frame type 3 0 30NDF 30NDF timecode frame type F F Sense This requests that the preset contents be returned. ・ If the unit receives any Data other than the above, it will send ILLEGAL [F2]. Return TC FRAME TYPE RETURN [FF06A1] 34 TEAC Corporation