TASCAM DA-6400 TELNET protocol specifications - Page 27

TASCAM DA-6400/DA-6400dp TELNET protocol specifications TOTAL PROJECT No. SENSE This requests that the name of the specified project be returned. This requests that the total number of projects on the current media be returned. Command 7F Category Code 02 Sub Command 5E Machine ID 0 Parameter none Return TOTAL PROJECT No. RETURN [FF02DE] MARK SET This sets a mark on the controlled device. Set a mark at the current time counter position. Command 7F Category Code 03 Sub Command 10 Machine ID 0 Parameter none DIRECT MARK SKIP PRESET Specify a mark number to skip to it. The mark number is the number counted from the beginning in chronological order. After moving, the mode at the beginning of movement is retained. Command 7F Category Code 03 Sub Command 23 Machine ID 0 Parameter 4 bytes Meaning Notes Data 5 Mark number tens digit Data 6 Mark number ones digit Mark number Data 7 Mark number Example: "9800" is mark 98 thousands digit Data 8 Mark number hundreds digit ・ If a number is specified for a mark that does not exist in the current take, the unit will return ILLEGAL [F2]. Return none 27 TEAC Corporation