TASCAM DA-6400 TELNET protocol specifications - Page 44

TASCAM DA-6400/DA-6400dp TELNET protocol specifications INPUT ROUTING SELECT This sets the INPUT ROUTING used by the controlled device. This sets the INPUT ROUTING from the start channel number specified by Data 5-8. A return command is only sent when Sense [xxFF] is specified for Data 5-8. Command 7F Category Code 12 Sub Command 50 Machine ID 0 Parameter 4-260 bytes Meaning Notes Data 5 Start channel number tens digit Data 6 Start channel number ones digit Start channel number Data 7 Always "0" Example: "6300" is channel 63 Data 8 Start channel number hundreds xxFF: Sense (xx is ignored) digit Data 9 Source channel number tens Start channel input setting digit Source slot number: 0 = Slot 1/1 = Slot 2 Data10 Source channel number ones Source channel setting digit Example: "3200" is Slot 1 channel 32 Data11 Source slot number Data12 Source channel number hundreds digit Data13 Source channel number tens Input setting for channel 1 higher than start channel digit Source channel setting Data14 Source channel number ones Example: "6410" is Slot 2 channel 64 digit Data15 Source slot number Data16 Source channel number hundreds digit ・ ・ ・ ・ If the unit receives any Data set outside the range, it will send ILLEGAL [F2]. Return INPUT ROUTING RETURN [FF12D0] 44 TEAC Corporation