TASCAM DA-6400 TELNET protocol specifications - Page 45
Set slot number: 0 = Slot 1/1 = Slot 2
![]() |
View all TASCAM DA-6400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
TASCAM DA-6400/DA-6400dp TELNET protocol specifications OUTPUT ROUTING SELECT This sets the OUTPUT ROUTING used by the controlled device. This sets the OUTPUT ROUTING from the slot and channel number specified by Data 5-8. A return command is only sent when Sense [xxFF] is specified for Data 5-8. (xx = slot number) Command 7F Category Code 12 Sub Command 51 Machine ID 0 Parameter 4-260 bytes Meaning Notes Data 5 Data 6 Data 7 Data 8 Start channel number tens digit Start channel number ones digit Slot number Start channel number hundreds digit Set slot number: 0 = Slot 1/1 = Slot 2 Start channel number setting Example: "6300" is from Slot 1 channel 63 xxFF: Sense (xx = slot number) Data 9 Source channel number tens Start channel output setting digit Example: "3200" is channel 32 Data10 Source channel number ones digit Data11 Always "0" Data12 Source channel number hundreds digit Data13 Source channel number tens Output setting for channel 1 higher than start channel digit Example: "6400" is channel 64 Data14 Source channel number ones digit Data15 Always "0" Data16 Source channel number hundreds digit ・ ・ ・ ・ If the unit receives any Data set outside the range, it will send ILLEGAL [F2]. Return OUTPUT ROUTING RETURN [FF12D1] 45 TEAC Corporation
![](/manual_guide/products/tascam-da6400-telnet-protocol-specifications-15cb01f/45.png)