TASCAM DA-6400 TELNET protocol specifications - Page 39

TASCAM DA-6400/DA-6400dp TELNET protocol specifications USER WORD PRESET This sets the FILE NAME USER WORD of the controlled device. A maximum of 31 bytes can be sent from Data 5 on. Command 7F Category Code 08 Sub Command 2A Machine ID 0 Parameter 1-31 bytes Meaning Notes Data 5 - Data35 User word character string ・ If a name that is not valid is specified from Data 5 on, the unit will send ILLEGAL [F2]. Return none TIME INTERVAL MARKER TIME PRESET This sets the TIME INTERVAL MARKER TIME of the controlled device. A return command is only sent when Sense [FF] is specified for Data 5 and Data 6. Command 7F Category Code 08 Sub Command 32 Machine ID 0 Parameter 2 or 4 bytes Meaning Notes Data 5 Data 6 Data 7 Data 8 Interval time tens digit Interval time ones digit Interval time thousands digit Interval time hundreds digit Interval time (minutes) Example: "2301" is an interval of 123 minutes (240 minutes maximum) ・ If the unit receives any Data set outside the range, it will send ILLEGAL [F2]. Return TIME INTERVAL MARKER RETURN [FF08B2] AUDIO OVER MARKER SELECT This sets the AUDIO OVER MARKER of the controlled device. A return command is only sent when Sense [FF] is specified. Command 7F Category Code 08 Sub Command 41 Machine ID 0 Parameter 2 bytes Data 5 Data 6 Meaning Notes 0 0 Marker Off AUDIO OVER MARKER OFF 0 1 Marker On AUDIO OVER MARKER ON F F Sense This requests that the preset contents be returned. ・ If the unit receives any Data other than the above, it will send ILLEGAL [F2]. Return AUDIO OVER MARKER RETURN [FF08C1] 39 TEAC Corporation