TASCAM DA-6400 TELNET protocol specifications - Page 25
During creation, the Project Name set using CREATE PROJECT NAME PRESET [7F024001] described
View all TASCAM DA-6400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
TASCAM DA-6400/DA-6400dp TELNET protocol specifications CREATE PROJECT This creates a new project. During creation, the Project Name set using "CREATE PROJECT NAME PRESET [7F024001]" (described below) will be used. At the beginning and end of execution, the controlled device will return "CREATE PROJECT ACKNOWLEDGE [FF02C000]". Command 7F Category Code 02 Sub Command 4000 Machine ID 0 Parameter none Return CREATE PROJECT ACKNOWLEDGE [FF02C000] CREATE PROJECT NAME PRESET This sets the project name used when a new project is created. Use this before executing "PROJECT CREATE [7F024000]". If FF is sent for Data 7/8, the controlled device will return "CREATE PROJECT NAME RETURN [FF02C001]". If Data 7/8 is anything other than FF, a maximum of 117 bytes in UTF-8 format can be sent from Data 7 on. Command 7F Category Code 02 Sub Command 4001 Machine ID 0 Parameter 2-117 bytes Return CREATE PROJECT NAME RETURN [FF02C001] REBUILD PROJECT This rebuilds the current project/session. At the beginning and end of rebuilding, "REBUILD PROJECT ACKNOWLEDGE [7F02C2]" will be returned. Command 7F Category Code 02 Sub Command 42 Machine ID 0 Parameter none Return REBUILD PROJECT ACKNOWLEDGE [FF02C2] 25 TEAC Corporation