TASCAM DA-6400 TELNET protocol specifications - Page 13

TASCAM DA-6400/DA-6400dp TELNET protocol specifications REPEAT MODE SELECT This sets the repeat mode of the controlled device. A return command is only sent when Sense [FF] is specified. Command 37 Machine ID 0 Data 2 bytes Data 1 Data 2 Meaning Notes 0 0 Repeat Off Repeat playback is off 0 1 Repeat Normal Normal repeat playback is active 2 1 Repeat Vamping "Vamping" repeat playback is active F F Sense This requests that the preset contents be returned. ・ If the unit receives any Data other than the above, it will send ILLEGAL [F2]. Return REPEAT MODE SELECT RETURN [B7] REMOTE/LOCAL SELECT Set whether operations using the controlled device itself are enabled or disabled. A return command is only sent when Sense [FF] is specified. Command 4C Machine ID 0 Data 2 bytes Data 1 Data 2 Meaning Notes 0 0 Remote Only remote operation through the CONTROL I/O (TELNET, RS-422, PARALLEL) is enabled. Operation using the keys on the unit itself is disabled. 0 1 Local Remote operation and operation using the keys on the unit itself are enabled. F F Sense This requests that the preset contents be returned. ・ If the unit receives any Data other than the above, it will send ILLEGAL [F2]. Return REMOTE/LOCAL SELECT RETURN [CC] PLAY MODE SELECT This sets the play mode of the controlled device. Use the "PLAY MODE SENSE [4E]" command to check the play mode. This command will be ignored if the operation mode is timeline mode. Command 4D Machine ID 0 Data 2 bytes Data 1 Data 2 Meaning Notes 0 0 All Take Play all takes in the current session 0 1 One Take Play only the current take ・ If the unit receives any Data other than the above, it will send ILLEGAL [F2]. Return none PLAY MODE SENSE This requests that the play mode of the controlled device be returned. Command 4E Machine ID 0 Data none Return PLAY MODE RETURN [CE] 13 TEAC Corporation