TASCAM DA-6400 TELNET protocol specifications - Page 35

TASCAM DA-6400/DA-6400dp TELNET protocol specifications TC OUTPUT MODE SELECT This sets the TC mode output by the TC output connector of the controlled device. A return command is only sent when Sense [FF] is specified. Command 7F Category Code 06 Sub Command 30 Machine ID 0 Parameter 2 bytes Data 5 Data 6 Meaning Notes 0 0 Generator Out Output Generator TC 0 1 Play Out Output the take playback TC F F Sense This requests that the preset contents be returned. ・ If the unit receives any Data other than the above, it will send ILLEGAL [F2]. Return TC OUTPUT MODE RETURN [FF06B0] CLOCK MASTER SELECT Set the master clock of the controlled device. A return command is only sent when Sense [FF] is specified. Command 7F Category Code 06 Sub Command 40 Machine ID 0 Parameter 2 bytes Data 5 Data 6 Meaning Notes 0 0 Internal Internal master clock 0 1 WORD Word master clock 0 2 VIDEO Video master clock 0 3 SLOT1 Master clock slot 1 0 4 SLOT2 Master clock slot 2 F F Sense This requests that the preset contents be returned. ・ If the unit receives any Data other than the above, it will send ILLEGAL [F2]. Return CLOCK MASTER RETURN [FF06C0] WORD THRU SELECT This sets the WORD/VIDEO SETUP of the controlled device. A return command is only sent when Sense [FF] is specified. Command 7F Category Code 06 Sub Command 48 Machine ID 0 Parameter 2 bytes Data 5 Data 6 Meaning Notes 0 0 WORD OUT/TERM ON Word out/termination on 0 1 WORD OUT/TERM OFF Word out/termination off 1 1 WORD THRU/TERM OFF Word thru/termination off F F Sense This requests that the preset contents be returned. ・ If the unit receives any Data other than the above, it will send ILLEGAL [F2]. Return WORD THRU RETURN [FF06C8] 35 TEAC Corporation