TASCAM DA-6400 TELNET protocol specifications - Page 29
Data 9 - Data 18
![]() |
View all TASCAM DA-6400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
TASCAM DA-6400/DA-6400dp TELNET protocol specifications MARK NAME PRESET Specify a mark number and change the name. The mark number is the number counted from the beginning in chronological order. A maximum of 10 bytes can be sent from Data 9 on. Command 7F Category Code 03 Sub Command 29 Machine ID 0 Parameter 5-18 bytes Meaning Notes Data 5 Mark number tens digit Data 6 Mark number ones digit Mark number Data 7 Mark number thousands digit Example: "9800" is mark 98 Data 8 Mark number hundreds digit Data 9 - Data 18 Title character string ・ If a number is specified for a mark that does not exist in the current take, the unit will return ILLEGAL [F2]. ・ If a name that is not valid is specified from Data 9 on, the unit will send ILLEGAL [F2]. Return none DELETE MARK Delete a mark on the controlled device. A mark number can be specified to delete a mark. If no mark number is specified, the nearest mark before the current position will be deleted. The mark number is the number counted from the beginning in chronological order. Command 7F Category Code 03 Sub Command 44 Machine ID 0 Parameter none or 4 bytes When parameter is 4 bytes Meaning Notes Data 5 Mark number tens digit Data 6 Mark number ones digit Mark number Data 7 Mark number Example: "9800" is mark 98 thousands digit Data 8 Mark number hundreds digit ・ If a number is specified for a mark that does not exist in the current take, the unit will return ILLEGAL [F2]. Return none 29 TEAC Corporation
![](/manual_guide/products/tascam-da6400-telnet-protocol-specifications-15cb01f/29.png)