TASCAM DA-6400 TELNET protocol specifications - Page 37

TASCAM DA-6400/DA-6400dp TELNET protocol specifications INPUT MONITOR FUNCTION SELECT This turns the input monitoring function of the controlled device on/off. This turns the input monitoring function on/off for the channel number specified by Data 5-8. If 0 is specified for the channel number, the input monitoring function setting for all channels can be specified with Data 9. If 0 is specified for the channel number, set only Data 9. If 0 is specified for the channel number and settings are made for Data 10 and on, the unit will return ILLEGAL [F2]. A return command is only sent when Sense [FF] is specified for Data 5 and Data 6. Command 7F Category Code 08 Sub Command 01 Machine ID 0 Parameter 5-68 bytes Meaning Notes Data 5 Start channel number tens digit Data 6 Data 7 Data 8 Start channel number ones digit Start channel number thousands digit Start channel number hundreds Start channel number Example: "6400" is channel 64 0000: all channels digit Data 9 ・ ・ Monitor function settings ・ 0 = off/1 = on If 0 is specified as the start channel, use only Data 9 Data72 ・ If the unit receives any Data set outside the range, it will send ILLEGAL [F2]. Return INPUT MONITOR FUNCTION RETURN [FF0881] 37 TEAC Corporation