TASCAM DA-6400 TELNET protocol specifications - Page 12

TASCAM DA-6400/DA-6400dp TELNET protocol specifications TIME SEARCH PRESET Search by designating a take number or time. After searching, the operation of the controlled device depends on the data format (length) of this command. When the Data length is 12-byte If this command is received when the unit is stopped or playing back, playback will start after searching. At all other times, the same status will be retained after searching. When the Data length is 14-byte After searching, the unit will follow the command given in Data 13/14. Command 2C Machine ID 0 Data 12 bytes or 14 bytes Meaning Notes Data 1 Take number tens digit Data 2 Take number ones digit Data 3 Take number thousands digit Data 4 Take number hundreds digit Data 5 Hour tens digit Data 6 Hour ones digit Data 7 Minute tens digit Data 8 Minute ones digit Data 9 Second tens digit Data 10 Second ones digit Data 11 Frame tens digit Data 12 Frame ones digit When the Data length is 14-byte, the following data is added Data 13 Data 14 Operation Notes 1 0 STOP Stop after searching completes 1 2 PLAY Start playback after searching completes 1 4 PAUSE Start playback standby after searching completes ・ If a number is specified for a take that does not exist, the unit will return ILLEGAL [F2]. ・ If the unit receives any Data outside the operations specifications, it will send ILLEGAL [F2]. ・ If a Data 13/14 operation specification code that is not in the table is specified, the unit will return ILLEGAL [F2]. Return none 12 TEAC Corporation