TASCAM DA-6400 TELNET protocol specifications - Page 14

TASCAM DA-6400/DA-6400dp TELNET protocol specifications MECHA STATUS SENSE This requests that operation status information for the controlled device be returned. Command 50 Machine ID 0 Data none Return MECHA STATUS RETURN [D0] TRACK No. STATUS SENSE This requests that the number of the current take/entry be returned. Command 55 Machine ID 0 Data none Return TRACK No. STATUS RETURN [D5] CURRENT TRACK INFORMATION SENSE This requests that information about the current take/entry be returned. If received during recording, ILLEGAL [F2] will be returned. Command 57 Machine ID 0 Data none Return CURRENT TRACK INFORMATION RETURN [D7] CURRENT TRACK TIME SENSE This requests that time information about the current take (or take being recorded) be returned. (Hour, minute, second, frame) Command 58 Machine ID 0 Data 2 bytes Data 1 Data 2 Meaning Notes 1 0 Elapsed Time Take elapsed time 1 1 Remain Time Take remaining time During recording, possible recording time until maximum file size 1 2 Total Elapsed Time Elapsed time of entire project 1 3 Total Remain Time Remaining time of entire project During recording, possible recording capacity of media 1 4 Timecode Time Timecode time ・ If the unit receives any Data other than the above, it will send ILLEGAL [F2]. Return CURRENT TRACK TIME RETURN [D8] TITLE SENSE This requests that the name of the specified take be returned. Command 59 Machine ID 0 Data 4 bytes Meaning Notes Data 1 Take number tens digit Data 2 Take number ones digit Take number Data 3 Take number thousands digit Example: "2301" is take 123 Data 4 Take number hundreds digit ・ If a number is specified for a take that does not exist, the unit will return ILLEGAL [F2]. Return TITLE RETURN [D9] 14 TEAC Corporation