TP-Link TL-SG3216 TL-SG3216 V1 User Guide - Page 117
DiffServ
View all TP-Link TL-SG3216 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 117 highlights
The QoS module is mainly for traffic control and priority configuration, including three submenus: DiffServ, Bandwidth Control and Voice VLAN. 9.1 DiffServ This switch classifies the ingress packets, maps the packets to different priority queues and then forwards the packets according to specified scheduling algorithms to implement QoS function. This switch implements three priority modes based on port, on 802.1P and on DSCP, and supports four queue scheduling algorithms. The port priorities are labeled as CoS0, CoS1... CoS7. The DiffServ function can be implemented on Port Priority, Schedule Mode, 802.1P Priority and DSCP Priority pages. 9.1.1 Port Priority On this page you can configure the port priority. Choose the menu QoS→DiffServ→Port Priority to load the following page. Figure 9-6 Port Priority Config The following entries are displayed on this screen: ¾ Port Priority Config Select: Port: Priority: LAG: Select the desired port to configure its priority. It is multi-optional. Displays the physical port number of the switch. Specify the priority for the port. Displays the LAG number which the port belongs to. Configuration Procedure: 110