TP-Link TL-SG3216 TL-SG3216 V1 User Guide - Page 135
ACL Config, Extend-IP ACL, Create Extend-IP ACL
View all TP-Link TL-SG3216 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 135 highlights
Choose the menu ACL→ACL Config→Extend-IP ACL to load the following page. Figure10-8 Create Extend-IP Rule The following entries are displayed on this screen: ¾ Create Extend-IP ACL ACL ID: Select the desired Extend-IP ACL for configuration. Rule ID: Enter the rule ID. Operation: S-IP: Select the operation for the switch to process packets which match the 1 rules. z Permit: Forward packets. z Deny: Discard Packets. Enter the source IP address contained in the rule. D-IP: Enter the destination IP address contained in the rule. Mask: Enter IP address mask. If it is set to 1, it must strictly match the address. IP Protocol: TCP Flag: Select IP protocol contained in the rule. Configure TCP flag when TCP is selected from the pull-down list of IP Protocol. S-Port: Configure TCP/IP source port contained in the rule when TCP/UDP is selected from the pull-down list of IP Protocol. D-Port: Configure TCP/IP destination port contained in the rule when TCP/UDP is selected from the pull-down list of IP Protocol. DSCP: Enter the DSCP information contained in the rule. 128