TP-Link TL-SG3216 TL-SG3216 V1 User Guide - Page 195
Cluster, NTDP Config, Global Config, Port Config
View all TP-Link TL-SG3216 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 195 highlights
Choose the menu Cluster→NTDP→NTDP Config to load the following page. Figure 13-8 NTDP Config The following entries are displayed on this screen: ¾ Global Config NTDP: Select Enable/Disable NTDP for the switch globally. NTDP Interval Time: Enter the interval to collect topology information. The default is 1 minute. NTDP Hops: Enter the hop count the switch topology collects. The default is 3 hops. NTDP Hop Delay: Enter the time between the switch receiving NTDP request packets and the switch forwarding NTDP request packets for the first time. The default is 200 milliseconds. NTDP Port Delay: Enter the time between the port forwarding NTDP request packets and its adjacent port forwarding NTDP request packets over. The default is 20 milliseconds. ¾ Port Config Select: Select the desired port for NTDP status configuration. Port: Displays the port number of the switch. NTDP: Displays NTDP status (enabled or disabled) of the current port. 188