Toshiba Tecra TE2100 User Guide - Page 163
Using a PS/2 mouse simultaneously with, AccuPoint II, Start, Control Panel, Printers and Other
View all Toshiba Tecra TE2100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 163 highlights
163 Expansion Options Using a mouse Using a PS/2 mouse simultaneously with AccuPoint II To configure the PS/2 mouse to work with the AccuPoint II: 1 Click Start, Control Panel, then Printers and Other Hardware. 2 Click the Toshiba HWSetup icon. 3 Select the Pointing Devices tab. 4 Under Pointing Devices Options, select one: ❖ Auto-selected - configures the PS/2 mouse to work when it is connected at power on, or the AccuPoint II to work otherwise. Auto-selected is normally the default option. ❖ Simultaneous - configures both the AccuPoint II mouse and PS/2 mouse to work with the computer at the same time. You must reboot the computer for the settings to take effect. HINT: When Auto-selected is the default, the computer can't detect a PS/2 mouse if you connect it after booting the computer. This can be changed in Toshiba Hardware Setup. 5 Click OK. A message appears stating "The changes will take effect next time the machine is rebooted. Reboot the machine now?" 6 Click Yes. The computer reboots, and the PS/2 mouse is activated.