Xerox 4540 Service Manual - Page 121
Maintaining the Sun Fire X4500 and X4540 Servers, 3.1 Tools and Supplies Needed
![]() |
View all Xerox 4540 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 121 highlights
3 C H A P T E R Maintaining the Sun Fire X4500 and X4540 Servers This chapter covers the following topics: ■ Section 3.1, "Tools and Supplies Needed" on page 3-1 ■ Section 3.2, "Locations of Components" on page 3-2 ■ Section 3.3, "FRUs/CRUs and BIOS Compatibility (X4540)" on page 3-4 ■ Section 3.4, "System Model Numbers (X4540)" on page 3-6 ■ Section 3.5, "Disk Drive Compatibility" on page 3-7 ■ Section 3.6, "Servicetool FRU Update Procedure" on page 3-8 ■ Section 3.7, "Powering Off and Removing the Covers" on page 3-10 ■ Section 3.8, "Finding the I/O Board and SP MAC Addresses" on page 3-15 ■ Section 3.9, "Replaceable Component Procedures" on page 3-17 3.1 Tools and Supplies Needed The Sun Fire X4500/X4540 server can be serviced with the following items: ■ No. 2 Phillips screwdriver (10-inch recommended length with magnetic tip) ■ Antistatic wrist strap ■ Nonconducting stylus or other pointed object (to press the recessed Power button) The following component replacements require additional tools: ■ Replacing the power distribution board requires No. 1 and No. 2 Phillips screwdrivers. ■ Replacing the front indicator board requires a No. 1 Phillips screwdriver (magnetic tip recommended). 3-1
![](/manual_guide/products/xerox-4540-service-manual-31966a4/121.png)