Xerox 4540 Service Manual - Page 213
Controls and Indicators, select Set LED to Fast Blink or Turn LED Off.
![]() |
View all Xerox 4540 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 213 highlights
TABLE C-1 Controls and Indicators # Name Color Description 1 Locate White button/LED Press to toggle on/off locally. Remains on (as fast blinking 4Hz) for 30 minutes or until turned off. Operators can turn this LED on remotely to help them locate the server in a crowded server room: • In the ILOM GUI, navigate to System Monitoring > Indicators and select the radio button next to /SYS/LOCATE. From the Actions drop-down menu, select "Set LED to Fast Blink" or "Turn LED Off." • In the CLI, enter: set /SYS/LOCATE value=[fast_blink|off] • Press to turn on or off. Press the Locate LED/Switch for five seconds to turn all indicators on for 15 seconds. 2 System Fault Amber Off-Normal operation LED On-Service action is required. A system running under these conditions are in a fault condition, but the SP does not log the reason the service LED is illuminated: • 220VAC with only 1 PSU • 110VAC with only two PSUs 3 Power/OK LED Green Steady on-Power is on and system is operational. Blinking-Standby power is on but main power is off. Blinks briefly once every 3 seconds. Off-Power is off. 4 System power button If on, press briefly for a controlled shut down. Press and hold for 4 seconds for immediate shutdown. Caution - Caution there may be data loss for immediate shutdown. See Section 2.1, "Powering On the Server" on page 2-2 for details. Appendix C Status Indicator LEDs C-3
![](/manual_guide/products/xerox-4540-service-manual-31966a4/213.png)