Xerox 4540 Service Manual - Page 35

2 C H A P T E R Powering On and Configuring BIOS Settings This chapter contains the following procedures and information. ■ Section 2.1, "Powering On the Server" on page 2-2 ■ Section 2.2, "Powering Off the Server" on page 2-3 ■ Section 2.3, "Automatic Power-Off Events" on page 2-3 ■ Section 2.4, "Configuring BIOS Settings" on page 2-4 ■ Section 2.5, "Ethernet Port (NIC) Device and Driver Naming" on page 2-5 ■ Section 2.6, "Power-On Self-Test (POST)" on page 2-6 ■ Section 2.7, "Load Optimal Default Settings During BIOS POST" on page 2-6 ■ Section 2.8, "BIOS Option ROM Size Limitation" on page 2-7 ■ Section 2.9, "BIOS Setup Screens (X4500)" on page 2-8 ■ Section 2.10, "Device Boot Detection Priority (X4500)" on page 2-10 ■ Section 2.11, "Drives Mapping (X4500)" on page 2-11 ■ Section 2.12, "BIOS Setup Menu Screens (X4500)" on page 2-12 ■ Section 2.13, "BIOS Setup Screens (X4540)" on page 2-45 ■ Section 2.14, "Device Boot Detection Priority (X4540)" on page 2-47 ■ Section 2.15, "Drives Mapping (X4540)" on page 2-48 ■ Section 2.16, "BIOS Setup Menu Screens (X4540)" on page 2-50 ■ Section 2.17, "Resetting the ILOM Root Password" on page 2-78 ■ Section 2.18, "Using the Clear CMOS Jumper" on page 2-83 ■ Section 2.19, "Resetting the SP" on page 2-84 ■ Section 2.20, "Updating BIOS" on page 2-84 ■ Section 2.21, "BIOS ROM Memory" on page 2-85 ■ Section 2.22, "Devices and PCI Slots" on page 2-85 2-1