Xerox 4540 Service Manual - Page 129

TABLE 3-6 Servicetool Options Other Options --fru_product_serial_number --fru_chassis_serial_number --fru_asset_tag Value Write a new product serial number to the mainboard FRU. Write a new chassis serial number to the mainboard FRU. Write a new asset tag to the mainboard FRU. 3. Reboot the server. Watch the output from the command and respond to the confirmation prompts for continuing the update and rebooting the server: Servicetool is going to collect system information for the service processor for future part swaps. The following preconditions must be true for this to work: * The new service processor must be installed. Do you want to continue (y|n)? y Service processor FRU information ready to be collected. You MUST reboot the service processor to complete this process. Allow the service processor to fully boot.s DO NOT UNPLUG THE SYSTEM WHILE THE SERVICE PROCESSOR IS BOOTING! Would you like to reboot the service processor now (y|n)?y The system is going down NOW !! Sending SIGTERM to all processes. 4. Verify the FRU information is updated: a. Once the SP has rebooted, log into sunservice. b. Type the following: cat /var/log/frutool.log c. Make sure the last line is: frutool::info::all FRUs updated successfully d. Make sure the following is true: i. Product part_number matches the part number on the back of the system. ii. Product serial_number matches the serial number on the back of the system. Chapter 3 Maintaining the Sun Fire X4500 and X4540 Servers 3-9