Xerox 4540 Service Manual - Page 165
To Replace a Battery (CRU), Power off the server as described in, Remove the cable management arm.
View all Xerox 4540 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 165 highlights
▼ To Replace a Battery (CRU) Note - This component is a CRU and can be replaced by anyone. Follow these steps to remove and replace the system battery. TABLE 3-13 lists the qualified part number for this component. These part numbers are subject to change over time. For an updated list of components, see the following web site: http://sunsolve.sun.com/handbook_pub/Systems/ TABLE 3-13 Sun Fire X4540/X4540 Supported Battery Part Numbers Component Battery (X4500, X4540) Part Number #150-3993 1. Power off the server as described in Section 3.7.1, "Powering Off the Server" on page 3-10. 2. Remove the cable management arm. See one of the following depending on your system: ■ Sun Cable Management Assembly Installation Guide for the Sun Fire X4540 Server ■ Sun X4500-J Slide Rail Installation Guide (X4500) ■ "Early-Production Slide Rail and CMA Information" on page G-1 (X4500) 3. Remove the system controller as described in "To Remove the System Controller (CRU)" on page 3-70. Chapter 3 Maintaining the Sun Fire X4500 and X4540 Servers 3-45