Xerox 4540 Service Manual - Page 133
To Remove the Drives Access Cover, To Install the Drives Access Cover
![]() |
View all Xerox 4540 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 133 highlights
▼ To Remove the Drives Access Cover The drives access cover protects the 48 drives in the server and ensures proper cooling to the drives and the system controller. To access the drives, you must first remove the drives access cover. Caution - When the server is on, the drives access cover must be in place to ensure proper cooling. Do not remove the cover for more than 60 seconds when the server is on. 1. Using a No. 2 Phillips screwdriver, loosen the left and right captive screws. See FIGURE 3-3. 2. Grasp the cover by its edges, lift the front up from the chassis, and pull it forward. FIGURE 3-3 Removing the Drives Access Cover (X4500 shown) ▼ To Install the Drives Access Cover 1. Postion the cover onto the rear of the chassis so that the cover's metal lip slides under the chassis. Chapter 3 Maintaining the Sun Fire X4500 and X4540 Servers 3-13
![](/manual_guide/products/xerox-4540-service-manual-31966a4/133.png)