Xerox 4540 Service Manual - Page 17

1.1.3 Summary of Features (X4500) TABLE 1-1 summarizes the features of the Sun Fire X4500 server. TABLE 1-1 Summary of Features (X4500) Feature or Component CPU Processor BIOS Memory Disk drives Service Processor Network I/O PCI I/O Other I/O Power Fans Sun Fire X4500 Server Two Revision E AMD64 Opteron quad-core processors on two CPU modules. 8 Mbit Flash memory with LPC interface. 8 DDR-I DIMM slots (4 per processor), up to 2 GB per DIMM (16 GB per system). Up to forty-eight 3.5-inch SATAType-1 disk drives of 250 to 1 TB capacity each (48 TB total system capacity). SP card mounted on video card in PCI slot that runs Integrated Lights Out Manager (ILOM) as described in the ILOM documentation (see "Related Documentation" on page xiii). • Four 10/100/1000BASE-T Gigabit Ethernet ports (RJ-45 connectors) • One 10/100BASE-T Ethernet net management port (RJ-45 Connector) • One RS-232 serial port (RJ-45 Connector) Two available PCI-X slots (x8), LSI SAS 1068E. (Third slot is reserved for a video card that system boots off until host software boots.) • Six SATA Controllers on IO Board, LSI SATA controller x 6. Each controller supports 8 drives • 51.5 mm (2.5 inches) maximum height • 169.3 mm (6.7 inches) maximum length • Four USB 2.0 ports • One VGA video port (D-15 connector) 1500 W DC max output per power supply, two bays, 1+1 redundancy, hot-swappable. 1130 W AC max system input power = 3856 BTU/hr = 0.321 Tons of Air Conditioning, 200-240 VAC. Five fan modules; also additional fans in each power supply. Cooling is front-to-back forced air. Chapter 1 Introduction to the Sun Fire X4500 and X4540 Servers 1-3