Xerox 4540 Service Manual - Page 39
Ethernet Port (NIC) Device and Driver Naming
View all Xerox 4540 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
4. Modify the setup field and close the screen. 5. If you need to modify other setup parameters, use the arrow and Tab keys to navigate to the desired screen and menu item, then repeat Steps 1 through 3. Otherwise, go to Step 5. 6. Press and release the right arrow key until the Exit menu screen is displayed. 7. Follow the instructions on the Exit menu screen to save your changes and exit the Setup utility. 2.5 Ethernet Port (NIC) Device and Driver Naming These servers each have four 10/100/1000BASE-T Gigabit Ethernet ports connected to individual Network Interface Cards (NICs). The chassis labeling of the physical ports is shown in FIGURE 1. FIGURE 1 Ethernet Port Chassis Labeling Designations NET 2 NET 3 NET 0 NET 1 The logical device naming for the NICs is reported differently by different interfaces and operating systems. Chapter 2 Powering On and Configuring BIOS Settings 2-5