Xerox 4540 Service Manual - Page 152
Remove the drives access cover., Identify the drive to be removed by checking its LEDs.
![]() |
View all Xerox 4540 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 152 highlights
*-See Sun Fire X4500-to-X4540 Migration User's Guide (820-6559). TABLE 3-11 Disk Drives for the X4540 Server Disk Drive Seagate 250GB/7200RPM, SATA 3.5" drive (X4540) Seagate 250GB/7200RPM, SATA, 3.5" (X4540) Seagate 500GB, SATA, 3.5" (X4540) Seagate 1TB SATA, 3.5" (X4540) Hitachi 500GB/7200RPM, SATA, 3.5" (X4540) Hitachi 1TB/7200RPM, SATA, 3.5" (X4500, X4540) Hitachi 2TB/7200RPM, SATA, 3.5" (X4500, X4540) Part Number #541-1468, XRA-ST1CH-250G7KZ (X-option) #541-3678, XRA-ST1CH-250G7KZ (X-option) #541-3679 #541-3730 #541-3050, XRA-ST1CH-500G7KZ (X-option) #540-7507, XRA-ST1CH-1T7K #541-4241 For a list of compatible SSDs, see "Replacing a Solid-State Drive (Sun Fire X4540 CRU)" on page 3-35. Note - Before removing a drive, have the replacement drive ready to be installed. For supported solid-state drives and their part numbers, see "Replacing a Solid-State Drive (Sun Fire X4540 CRU)" on page 35. Caution - To avoid overheating the server, if the server is powered on, do not leave a disk drive out for longer than 60 seconds at a time. Remove and replace only one disk drive at a time. Replace the disk drive access cover as soon as the service tasks are completed. Before removing a drive, have the replacement drive ready to be installed. Note - Early fan trays had a blue LED that was not activated. Later versions of the fan trays have only a green and amber LED. 1. Remove the drives access cover. See "To Remove the Drives Access Cover" on page 3-13. 2. Identify the drive to be removed by checking its LEDs. If the middle LED is on (amber), the drive is faulty and should be replaced. 3-32 Sun Fire X4500/X4540 Server Service Manual • May 2010
![](/manual_guide/products/xerox-4540-service-manual-31966a4/152.png)