Yamaha ELC-02 ELC-02/ELCU-M02 Owners Manual - Page 101

4 Select the targeted Registration numbers and turn them on. Parameters in Registrations set to ON will be changed. Unifying Values/Settings of a Specific Parameter Unifying the currently highlighted parameter's value: Pressing [SET] unifies the currently highlighted parameter's values to the one in the currently selected Registration (at the cursor position). A message appears prompting you to confirm the operation. Press the targeted Registration in the display and turn it on with the SETTINGS buttons: ALL ON, ALL OFF, ON, OFF, and SELECT. 6 Registration Memory ALL ON: Selects all Registration memory numbers. ALL OFF: Cancels all Registration memory numbers. ON: Sets the currently selected Registration memory number to "ON." OFF: Sets the currently selected Registration memory number to "OFF." SELECT: Turns on the Registration memory numbers that contain the same Voice as the one which is currently set in the Registration at the cursor position. The targeted Registration numbers are underlined. To continue the operation, select [UNIFY]. Select [CANCEL] to abort the operation. Offsetting the currently highlighted parameter's value: Pressing the [+]/[-] buttons in the display or using the Data Control dial offsets the currently highlighted parameter's value. If you select Pan as the parameter, the [-][3] buttons are shown instead of [+]/[-]. If you change the value, and if parameter values for some Registration memory number reach the maximum or minimum, the following message appears. 5 Unifies the currently turned-on parameter's values. You unify the relevant parameter values in each Registration memory number or offset them. Keep in mind that you cannot restore the original data once you change the parameter's value. In this case, pressing [OK] continues the operation, ignoring those parameters at maximum or minimum value. Pressing [CANCEL] aborts the operation. ELC-02/ELCU-M02 Owner's Manual 101