Yamaha ELC-02 ELC-02/ELCU-M02 Owners Manual - Page 200
the screw., Attach the hollow parts on the rear
![]() |
View all Yamaha ELC-02 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 200 highlights
Installing the Pedal unit 1-3 Hold the cable connector so that the two lines on the connector are facing upward, then carefully plug it into the inside connector on the bottom of the Expression Pedal. 4 Attach the hollow parts on the rear of the Pedal unit to the corresponding indentions on the frame of the stand, as shown below. 1-4 Install the Expression Pedal to the corresponding indentation on the Pedal unit by first fitting the protrusion on the back side and then fitting the front side as shown. As you fit it in position, the front side of the Expression Pedal is slightly lifted. When installing the Expression Pedal, be careful to avoid catching the connector. Installation is completed. To disassemble the unit, reverse the assembly sequence. NOTE For information on installing the connecting cord, refer to page 201. 2 Tighten the screw. Fix the Expression Pedal to the Pedal unit while holding the Expression Pedal, using the screw you removed in step 1-2. Convenient carrying handle You can transport the Pedal unit by holding the carrying handle on the rear. CAUTION Do not hold the keys, since this may damage or result in a malfunction. 3 As with the Expression Pedal, install the 2nd Expression Pedal, then fix it with the screw. 200 ELC-02/ELCU-M02 Owner's Manual
![](/manual_guide/products/yamaha-elc02-elc02elcum02-owners-manual-9285ecc/200.png)