Yamaha ELC-02 ELC-02/ELCU-M02 Owners Manual - Page 96

Initializing Registration Memory 4 Press the [UNIT EDIT] button on the lower right side of the display to call up the Unit Edit display. 5 Press the [SAVE] button in the display. A message appears, indicating the Registration data is currently being saved. When the operation is completed, the message closes. Reference pages • Recalling Recorded Registrations (page 118) • Changing the Song Name (page 114) The Registration data stored to Banks A - E is now saved as a Unit to the USB flash drive. Initializing Registration Memory Deleting all Registration data in Registration Memory initializes the Registration Memory. Be careful when using this operation, since it erases all your existing data. In order to avoid inadvertently losing your important data, save it to a USB flash drive. Reference page • Factory Set (Initializing the Electone); (page 23) 1 Press the [UTILITY] button on the panel to call up the GLOBAL Page in the Utility display. About Banks and Units The Registration Memory data (16 x up to 5 Banks) stored to internal memory of the instrument will be handled as "Unit." If you want to create more than 80 (=16 x 5 Banks) Registrations, create another Unit to create more additional Registrations. The Unit can be edited in the MDR function. See page 117. Song Unit 3 Unit 2 Unit 1 Bank E Bank D Bank C Bank B Registration Memory Bank A 12345678 9 10 11 12 13 14 15 16 2 Press the INITIALIZE [EXECUTE] button on the right side in the display. The message "Are you sure you want to initialize Registration data?" appears. Press [INITIALIZE] to actually initialize the data. When the operation is complete, the Electone will be restarted. Press [CANCEL] to cancel the operation. 96 ELC-02/ELCU-M02 Owner's Manual