Yamaha ELC-02 ELC-02/ELCU-M02 Owners Manual - Page 41

Settings Selected from the Voice Condition Display Settings Selected from the Voice Condition Display  TOUCH TONE The Touch Tone function gives you expressive control over the volume and timbre of a Voice. All Voices are provided with this expressive function, making it possible to perfectly reproduce the subtle dynamic and tonal Choose a Voice on the panel, then press the same button changes of actual instruments. on the panel again (or press the name of the selected Two types of keyboard touch affect this function: Initial Voice in the display). The Voice Condition display Touch and After Touch. appears. Voice Condition display for each Voice has five pages that can be switched by pressing [1] - [5] buttons at the top right of the display.  -1 INITIAL touch Controls volume and timbre according to the 4 velocity at which you play the keys. The harder you play the keys, the greater the volume and the Voice Controls and Effects Voice Condition [Page 1] brighter the timbre will become. Higher settings make the change wider. Minimum setting produces no effect.     Range: 0 - 14 NOTE Initial Touch may not be effective on some organ Voices.  -2 AFTER touch Controls volume and timbre according to the pressure you apply to the keys after playing them. The harder you press down on the keys, the greater -1 -2 -1      the volume and the brighter the timbre will become. Higher settings make the change wider. Minimum setting produces no effect.   Range: 0 - 14 NOTE • After Touch is not applied to the Pedal Voices.  • After Touch has no effect on percussive Voices (such as piano or vibraphone), percussion sounds, or some organ Voices. -1   In this display, you can adjust the basic Voice controls, including panning, touch tone and volume. The displays of the various Voice sections have slight differences in their functions.  Voice Link Lets you register the settings on the Voice Condition display (except for Volume and Brilliance) to the Voice Link Category as a Voice. The registered Voice can be selected from the "Voice Link" category on the display called up via the User buttons of all the Voice Sections. For detailed instructions, see page 48.  PITCH Controls pitch according to the playing style of Horizontal Touch or After Touch. On some Voices in the Lead Voice 2 section, not only pitch but also timbre may be affected.  -1 AFTER touch Controls the pitch according to the pressure you apply to the keys after playing them. The minimum setting produces no effect at all. Higher (positive) settings make the pitch higher according to the pressure and lower (negative) settings make the pitch lower. The extreme settings of +14 and -14 result in the widest pitch change. Range: -14 - +14  PAN Determines the position of the Voice in the stereo image. Seven pan positions are available. ELC-02/ELCU-M02 Owner's Manual 41