Yamaha ELC-02 ELC-02/ELCU-M02 Owners Manual - Page 137

While holding down... Editing a Voice Editing an AWM Voice You can edit an AWM Voice on the AWM Page and LAYER Page in the Voice Edit display. In the AWM Page, the tonal balance of the entire Voice can be corrected by some EQ parameters. In the LAYER Page, you can make detailed edits to each Element. AWM Page       Element On/Off switches The [AWM1-4] and [AWM5-8] buttons enable you to alternate the pages between AWM 1 - 4 and AWM 5 - 8. The [AWM1] - [AWM8] buttons indicate the Elements 9 which make up the selected Voice. You can mute any of the Elements by simply pressing the corresponding button. Pressing the button again cancels the mute. Voice Edit Press the Voice button. After you have selected the Voice button, the AWM Page (first page of the Voice Edit display) will appear.  VOICE/ELEMENT Indicates the Voice/Element currently being edited. In the example screen above, Element 1 of Accordion 1 is assigned to AWM1, Element 2 of Accordion 1 is assigned to AWM2, and no Voice is assigned to AWM3 and AWM4. You can also call up another Element from another Voice and replace the currently selected Element with it. Pressing the VOICE or ELEMENT button in the display calls up the Voice or Element menu, from which you can select the desired Voice/ Element (usually Element 1). If you change the Voice, the Element will automatically change to the first Element of the Voice (usually Element 1). If you release the [VOICE EDIT] button before pressing a Voice button, the Voice Edit function will not be called up, and the normal Voice Display will appear.  EQ LOW FREQ./EQ LOW GAIN Sets the frequency and gain (level) of the low frequency band. The EQ LOW FREQ. slider sets the desired frequency band over a range of 32 Hz - 2.0 kHz. The EQ LOW GAIN slider sets the level for the frequency band (specified by the EQ LOW FREQ. slider) over a range of -12 dB - +12 dB. ELC-02/ELCU-M02 Owner's Manual 137