Yamaha ELC-02 ELC-02/ELCU-M02 Owners Manual - Page 45

Selecting from the Panel NOTE Depending on the reverb depth value (set by the slider), two adjacent REVERB lamps may be lit at the same time, indicating an intermediate position. REVERB [Page 2]  ORGAN Determines the amount of reverb applied to the Organ Flute Voice. This parameter corresponds to the REVERB slider contained in the ATTACK/VOLUME Page of the Organ Flute display. Range: 0 - 24 Reference page • Organ Flutes (page 38) 4 REVERB [Page 3] Voice Controls and Effects     TYPE Determines the reverb type for each of the Voice sections and the Organ Flute Voice. Several types can be selected: Room, Hall, Stage, and so on. Pressing the TYPE button on the display calls up the Reverb Type list. Reference page • Effect List (page 52) Press the number buttons to change the display pages. Determines the amount of reverb effect applied to each Voice section. Each slider corresponds to the REVERB slider in Voice Condition Page 1 of the respective Voices. Range: 0 - 24 REVERB [Page 4] The list contains many reverb types, more than can fit on one display page. To change the display pages, press the appropriate number buttons [1] or [2] in the display. Select the desired reverb type from the list. To abort the operation, press the [CLOSE] button. After changing the reverb type, the TIME parameter below is automatically changed corresponding to the selected reverb type.  TIME Determines the reverb length for each of the Voice sections and the Organ Flute Voice. Higher settings make the reverb effect longer. Range: 0.3s - 30.0s      TYPE Determines the reverb type for rhythm, accompaniment, keyboard percussion, and microphone signal. Reference page • Connecting a microphone (page 185)  TIME Determines the length of reverb applied to the rhythm, accompaniment, keyboard percussion, and microphone signal. Range: 0.3s - 30.0s ELC-02/ELCU-M02 Owner's Manual 45