Yamaha ELC-02 ELC-02/ELCU-M02 Owners Manual - Page 23
Confirming the Electone Version, Factory Set (Initializing the Electone)
![]() |
View all Yamaha ELC-02 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Confirming the Electone Version You can confirm the version of your Electone by the following procedure. 1 Press the [UTILITY] button. The Utility display appears. 2 On the GLOBAL Page, press the [Version] button in the display. Confirming the Electone Version 1 Factory Set (Initializing the Electone) All current settings including Registration Memory, User Voices, User Rhythms, and LCD display settings can be deleted at once by the following procedure. Note that the operation here does not affect the settings of the wireless LAN settings, which can be initialized on page 196. Reference pages • Saving Registrations (page 116) • Initialize the wireless LAN settings (page 196) 1 Turn off the power. 2 While holding down the ENDING [1] button, turn the power back on. Quick Introductory Guide The Version dialog appears in the display. Pressing [OK] closes the dialog. About the latest Firmware Version Yamaha may from time to time update firmware of the product without notice for improvement. We recommend that you check our web site for the latest releases and upgrade your firmware of the Electone. http://download.yamaha.com/ Note that the explanations in this Owner's Manual apply to the version of firmware when this Owner's Manual was produced. 3 Release the ENDING [1] button after Voice Display appears. If you don't want to reset the LCD display settings, you can initialize only the Registration settings. See page 96 for more information. Reference page • Initializing Registration Memory (page 96) NOTICE Executing the Factory Set will erase all your existing data. Always save your important data to the USB flash drive. ELC-02/ELCU-M02 Owner's Manual 23
![](/manual_guide/products/yamaha-elc02-elc02elcum02-owners-manual-9285ecc/23.png)