Yamaha ELC-02 ELC-02/ELCU-M02 Owners Manual - Page 197

14 Appendix Stand Assembly  CAUTION • Be sure to install the stand with two or more people. • Take care not to drop the Main unit or to pinch your finger(s). • Always place the stand on a flat, stable surface. Placing the stand on uneven surfaces may result in it becoming unstable or overturn, causing the Main unit to drop and possibly resulting in injury. • Do not use the stand for anything other than its designed purpose. The stand is not designed to hold anything other than the specified keyboard. Placing any object other than the specified keyboard on the stand may result in the object dropping or the stand overturning. • Do not apply excessive force to the Main unit as it may cause the stand to overturn or the Main unit to drop. • Make sure the stand is sturdy and safe, and all screws are tight and firm before use. If not, the stand may overturn, the keyboard may drop, or may result in injury to the user. Please confirm that all parts shown in the illustration are provided. Stand Braces 1 Unfold the folded stand. Unfold the stand as shown.   2 Fix the joints. 2-1 Extend the frame so that the joints are straight. NOTE Once the joints reach the stoppers, the frame is at the maximum length. Do not try to force them beyond this. 2-2 Loosen the fixation bolts and slide them into position, then tighten the screws with your hand.    NOTE If the fixation bolts cannot be slid into position, make sure that the joints are straight, as shown in the illustration of step 2-1. Appendix 14 ELC-02/ELCU-M02 Owner's Manual 197