Yamaha ELC-02 ELC-02/ELCU-M02 Owners Manual - Page 13
Quick Introductory Guide, Getting Started, Turning the Power
![]() |
View all Yamaha ELC-02 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
1 Quick Introductory Guide Whether you are an advanced performer or have never touched an electronic keyboard in your life, we recommend that you take the time to go through this basic section. It shows you in the simplest possible manner how to start playing your Electone. Getting Started Turning the Power On 1 Connect the plugs of the AC adaptor in the order shown in the illustration. DC IN jack (page 181) Cable clip DC plug AC adaptor Power cord AC outlet AC plug Cable clip Wrap the DC output cable of the adaptor around the cable clip (as shown below) to prevent accidental unplugging of the cable during operation. WARNING Use the specified adaptor (page 208) only. The use of other adaptors may result in irreparable damage to both the adaptor and the instrument. WARNING Use only the supplied power cord/plug for the Electone. CAUTION Remove the AC plug from the AC outlet when the instrument is not to be used for extended periods of time, or during electrical storms. NOTE Follow this procedure in reverse order when disconnecting the AC adaptor. CAUTION Only use the voltage specified as correct for the Electone. The required voltage is printed on the name plate of the Electone. Yamaha products are manufactured specifically for the supply voltage in the area where they are to be sold. If you intend to use the instrument in another location, or if any doubt exists about the supply voltage, please consult with a qualified technician. 2 Ensure that the speaker and the Pedal Unit are correctly connected (page 201). 3 Plug the power cord of the speakers into an appropriate electrical outlet. 4 Press the [1] Power switch located on the right of the keyboard to turn the power on. To turn off the Electone, press the [1] Power switch again. CAUTION Even when the power switch is turned off, electricity is still flowing to the instrument at the minimum level. When you are not using the instrument for a long time, make sure you unplug the power cable from the wall AC outlet. 5 Press the Power switch of the Speaker to turn the power on. The POWER indicator lights up green when the power is ON. 6 Set the MASTER VOLUME control. The MASTER VOLUME control is an overall control that affects the volume of the entire Electone. Increasing the volume Decreasing the volume 7 Press the Expression pedal down with your foot. Maximum volume Minimum volume ELC-02/ELCU-M02 Owner's Manual 13
![](/manual_guide/products/yamaha-elc02-elc02elcum02-owners-manual-9285ecc/13.png)