Yamaha ELC-02 ELC-02/ELCU-M02 Owners Manual - Page 42

Settings Selected from the Voice Condition Display  FEET Determines the octave setting of the Voice, letting you use the Voice over a wide register. There are three settings: 4', 8' and 16' (4' is highest and 16' is lowest). A 2' setting is added to the Pedal Voice sections. PRESET is the original (factory) setting.  REVERB Determines the amount of reverb applied to each Voice section. When the panel REVERB control is set to the minimum, the setting here will have no effect. See page 44 for details.  BRILLIANCE Determines the tonal quality of the Voice, brighter or mellower. Range is from -3 to +3. Higher settings makes the Voice tone brighter.  VOLUME Fine adjustment of the Voice volume. See page 26 for more information.  PRIORITY (only for the Lead Voice 2) Determines the mode of Lead Voice 2, Last or Top. • LAST: Only the last played key is sounded when two or more keys are played simultaneously. • TOP: Only the highest note is sounded when two or more keys are played simultaneously. When the Solo mode is on, Lead Voice 2 sounds according to Last mode, regardless of the setting made here. Reference page • Solo function (page 27) POLY (only for Pedal Voices) Allows you to switch the pedal polyphonic mode on or off. Setting POLY to on switches the normally monophonic pedal Voices to polyphonic play. This makes it possible to play the Pedalboard in various expressive ways, such as playing legato or playing intervals and chords. Keep in mind that you cannot exceed the total maximum polyphony: 14 notes for all sections, Upper, Lower and Pedal. Voice Condition [Page 2]  -1    -2 -3 -4  -1 -2 -1 -2 The items included in this page differ between the Lead Voice sections and the other sections. SLIDE () only applies to Lead Voice 1 and 2.  VIBRATO The Vibrato function wavers the level of the Voices, making them sound warmer and more animated. This effect is applied independently to each Voice section. For some Voices, vibrato may not be effective at all or the effect may not sound as expected.  -1 PRESET/USER Selecting PRESET calls up the original (factory) vibrato settings for the Voice. When PRESET is selected, DELAY, DEPTH and SPEED parameters cannot be edited. Selecting USER lets you adjust the vibrato settings for yourself. Vibrato Control Delay Speed Depth  -2 DELAY Determines the amount of time that elapses between the playing of a key and the start of the vibrato effect. Higher settings increase the delay of the vibrato onset. Range: 0 - 14  -3 DEPTH Determines the intensity of the vibrato effect. Higher settings result in a more pronounced vibrato. The minimum setting cancels the vibrato effect. Range: 0 - 14 42 ELC-02/ELCU-M02 Owner's Manual