Yamaha ELC-02 ELC-02/ELCU-M02 Owners Manual - Page 43

Settings Selected from the Voice Condition Display  -4 SPEED Determines the speed of the vibrato effect. Higher settings increase the speed of the vibrato. Range: 0 - 14 Voice Condition [Pages 3 and 4]   TOUCH VIBRATO  Turns the Touch Vibrato function on or off. Setting Touch Vibrato to on lets you apply vibrato to individual notes as you play them by after touch. The harder you press down the key, the greater the vibrato will be. When 4 Touch Vibrato is off, vibrato depth cannot be controlled, no matter how hard you press the keys. Voice Controls and Effects NOTE Touch Vibrato is not applied to the Pedal Voices of this Electone.  SLIDE (only for Lead Voices) Applies a portamento effect to notes played in legato. The Slide function is effective within a one-octave range for Lead Voices. Slide has no effect when playing notes beyond a one-octave range. Reference page • Controlling Lead Slide with Foot Pedal (sold separately; see page 177)  -1 ON/FOOT PEDAL/OFF On/Off switch and Foot Pedal selector for the Slide effect.  You can edit the effect parameters from these two displays. Both displays have the same contents. You can select two effects for each Voice section with these displays (Voice Condition Pages 3 and 4).  EFFECT 1 (Page 3)/EFFECT 2 (Page 4) Selects the effect category. Pressing the EFFECT button on the display calls up the effect category list. Select the desired effect category from the list. To abort the operation, press the [CLOSE] button. Reference page • Effect List (page 52)  -2 TIME Determines the speed of the slide or portamento effect. Higher settings makes the slide speed slower. Range: 0 - 14 NOTE The parameters here are not available when a Super Articulation Voice is selected.  ARTICULATION The settings here, available only for Super Articulation Voices, produce effects (such as pitch bend and glissando) which are characteristic of the corresponding acoustic instrument, making your keyboard performance more realistic.  -1 AUTO Setting this to ON will apply various effects such as pitch bend and glissando to your keyboard performance.  -2 FOOT SW LEFT Determines the effect produced via the Left Footswitch: ART.1, ART.2 and OFF. NOTE For information about what effect is produced by setting AUTO, ART.1 and ART.2 to ON, see "Super Articulation Voice Supplementary List" on pages 34 - 36. As listed on these pages, AUTO, ART.1 and ART.2 are not available for some Voices. By selecting [PRESET] in the list, the original (factory) effect category for the selected Voice is automatically set. Selecting [THRU] bypasses the effect (no effect is added to the selected Voice).  TYPE 1 (Page 3)/ TYPE 2 (Page 4) Determines the type of the effect. Pressing the TYPE button on the display calls up the effect type list, corresponding to the selected effect category. Select the desired effect type from the list. To abort the operation, press the [CLOSE] button. If you have selected the [PRESET] category, the effect type cannot be edited. After changing the effect type, the effect parameter below is automatically changed corresponding to the selected effect type.  Effect Parameters Effect parameters are displayed corresponding to the selected effect type. ELC-02/ELCU-M02 Owner's Manual 43