Yamaha ELC-02 ELC-02/ELCU-M02 Owners Manual - Page 44

Selecting from the Panel Voice Condition [Page 5] Selecting from the Panel The Reverb, Sustain, Brilliance and Rotary Speaker displays are called up by pressing the respective buttons on the panel. Reverb   TRANSPOSE Changes the pitch in semitones for each Voice section. Range is from -6 to +6. Reference page • Transpose (for entire instrument); (page 180)  TUNE Determines the fine pitch settings (detune) for each Voice section, producing a richer sound. Each step represents a 1-cent change in pitch. Range: -64 - +63 Reference page • Pitch (for entire instrument); (page 180) Reverb adds an echo-like effect to the sound, giving the impression of a performance in a large room or concert hall. You can adjust the reverb volume for each Voice sections, or adjust the reverb volume for rhythm and accompaniment separately. To adjust the reverb effect and call up the Reverb pages: Press one of the REVERB buttons, located to the left of the panel, to set the Reverb effect. The Reverb display appears. The Reverb display consists of four pages. REVERB [Page 1] 44 ELC-02/ELCU-M02 Owner's Manual DEPTH: Fine adjustment of the depth of reverberation or the level of the reflected sounds. Coarse reverb depth settings are made with the panel REVERB buttons. The REVERB buttons let you make coarse adjustment in five settings to the reverb depth while the slider gives you fine control. When this parameter or the panel REVERB control is set to the minimum, the settings in the pages that follow have no effect. Range: 0 - 24