Yamaha ELC-02 ELC-02/ELCU-M02 Owners Manual - Page 131
AUDIO Record button to engage
View all Yamaha ELC-02 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 131 highlights
1 Connect a compatible USB flash drive to the [USB TO DEVICE] terminal. Reference page • Compatible USB flash drives (page 130) 2 Press the [AUDIO] button located at the top right on the panel to call up the AUDIO Page. Recording Your Performance as Audio 4 Press the [*] (Record) button to engage Standby status for recording. 8 Audio NOTE Songs you've created on the Electone will not be shown in the AUDIO Page even when the USB flash drive contains Songs. 3 Select a blank audio file for recording your performance. To call up a blank audio file, press the (IN) button in the display of step 2 to open the USB flash drive, then select the blank audio file. Since the operation for selecting audio files is the same as that for Songs, refer to the "Selecting a Song" on page 110. 5 Start recording by pressing the [3] (Play) button, and then start your performance. When recording begins, the elapsed recording time is shown in the lower left of the AUDIO Page. Once the elapsed recording time is shown, you can load the Registration or play the Song with the MDR. Elapsed recording time NOTICE Never attempt to disconnect the USB flash drive or turn the power off during recording. Doing so may corrupt the USB flash drive data or the recording data. 6 When you finish playing, press the [+] (Stop) button. Recording stops and the audio file to which your performance is recorded is automatically named and selected in the AUDIO Page. ELC-02/ELCU-M02 Owner's Manual 131