Yamaha ELC-02 ELC-02/ELCU-M02 Owners Manual - Page 183

Connection Examples - External Devices Connection Examples - External Devices CAUTION Before connecting the Electone to other electronic components, turn off the power to all the components. Before turning the power of the components on or off, set all volume levels to minimum (0). Otherwise, electrical shock or damage to the components may occur. Using headphones To use headphones, connect them to one of the PHONES jacks (standard 1/4" phone jacks). Using a mixer for live performance Generally, when you use this Electone on stage (in concert, etc.), you should connect it to a mixer. By using a mixer, you can easily adjust the volume and tone quality of each component. To connect to a mixer, use the AUX OUT jacks of the Electone. The Electone features two types of AUX OUT jacks: MAIN and SUB, allowing you to assign some parts of the Electone's output to the SUB jacks and the other parts to the MAIN jacks. In this way, you can apply effects to the specific parts or adjust the volume balance among the parts with an external mixer. For details, see "Selecting Outputs for Each Part" on page 184. AUX OUT of this Electone is a a terminal of LEVEL FIXED terminal which outputs on a fixed level. Monitor Speakers Main Speakers (ex. Powered-amp Speakers) Sound Sound PHONES Other keyboard Sound Sound Playing the sounds of the Electone through an external audio system By using the OUTPUT jacks, you can connect your Electone to external powered speakers. If you're connecting the Electone to a mono device, use only the OUTPUT L/L+R jack. External effect device MIC. Sound Mixer Other Parts AUX OUT (MAIN) L/L+R AUX OUT (SUB) R 1 2 Some Parts 13 Connections Speaker (Left) Speaker (Right) AUX OUT L/L+R R NOTE • When sounding the Electone from the speakers using the OUTPUT jacks, connecting a set of headphones automatically disables the sound from the speakers. • Speakers are not included with the ELCU-M02. Please use commercially available powered speakers. The OUTPUT terminal can be used for connection the Electone with a mixer. The OUTPUT terminal can be adjusted the output level by using the MASTER VOLUME dial. Jacks AUX OUT MAIN jacks L/L+R, R AUX OUT SUB jacks 1, 2 OUTPUT jacks L/L+R, R Output Type Unbalanced* LEVEL FIXED Unbalanced LEVEL FIXED Unbalanced LEVEL FIXED *The Unbalanced line is intended for line-level signals. ELC-02/ELCU-M02 Owner's Manual 183